HP iPAQ 214 Soft reset

HP iPAQ 214 Hard reset
(2) Reset Button

Press to reset your HP iPAQ.

Perform a soft reset

1. Locate the recessed Reset button on the HP iPAQ.
2. Use the stylus to lightly press the Reset

A soft reset stops all running applications, but does not erase any programs or saved data

NOTE: Be sure to close all running applications before performing a soft reset.

HP iPAQ 214 Hard reset


HP iPAQ Setup Assistant

Use HP iPAQ Setup Assistant to simplify configuring settings on your HP iPAQ.
HP iPAQ Setup Assistant lets you save the settings on your computer. This can help you restore configuration settings on your HP iPAQ at any time. HP iPAQ Setup Assistant also allows you to perform a factory reset on your HP iPAQ and view detailed product information.

You can reinstall applications on your HP iPAQ after the hard or clean reset is complete by using ActiveSync or WMDC on your computer.

HP iPAQ 210 Performing a Factory Reset


A factory reset clears all user-installed settings, programs, and data, and restores your HP iPAQ 200 Series Enterprise Handheld to factory settings.

Save all the important programs and files in the iPAQ File Store folder before you factory reset the device. Before saving files to the iPAQ File Store folder, it is a good idea to determine how much memory is available in the folder.

Step one: Checking memory availability in iPAQ File Store folder

Follow these steps to view the memory available in iPAQ File Store folder.
  1. Tap Start on your device.
  2. Then tap Settings > System > Memory > Storage Card .
  3. Select iPAQ File Store from the list.
Step two: Saving files and programs in iPAQ File Store folder
Follow these steps to save files to iPAQ File Store folder:
  1. Copy all the files to be saved to the iPAQ File Store folder.
  2. Tap Start > Programs > File Explorer > My HP iPAQ > iPAQ File Store .
  3. Tap Edit > Paste .
CAUTION: iPAQ File Store might contain a special folder called hp to store system files. Do not save new files or modify existing files in this hp folder.
Step three: Performing factory reset
Follow these steps to perform a factory reset of the device.Press and hold the Record , Windows , OK , and Reset buttons at the same time.
Figure 1: Buttons used to perform factory reset

  1. 1 - Record
    2 - Windows
    3 - OK
    4 - Reset
  2. Hold all the buttons for 2 seconds.
  3. Release the Reset button while continuing to hold the Record , Windows , and OK buttons.
  4. A Clean Boot message is displayed, indicating successful restoration of factory settings on your device.

 


Documentazione: Vedi

HP iPAQ 200 Series Enterprise Handheld - Pairing and Unpairing Bluetooth Devices
Introduction
You can pair devices such that they exchange a computer generated security key prior to each connection. The security key is generated from a unique Bluetooth device address, a random number, and a user-defined password. After two devices are paired, they have a trusted relationship with each other. Your connections and activities can then be performed between the paired devices, without giving constant authorization.
Pairing Bluetooth devices
Follow these steps to pair two devices.
  1. Tap the (iPAQ Wireless) icon.
  2. Tap the (Bluetooth) icon to turn Bluetooth on.
  3. Tap Bluetooth > Bluetooth Connections > Menu > Paired devices .
  4. Tap Add .
  5. Tap Lookup icon.
  6. Tap a device .
  7. Enter a password in the Passkey field.
  8. Tap ok .
  9. Enter the same password into the other device.
If you can see other devices, but you cannot connect or exchange data with them, try these options.
  • Make sure the other device has not restricted your access.
  • Try initiating pairing from the other device. Some Bluetooth devices can only initiate pairing and cannot respond to pairing requests from other devices.
If other devices cannot find or connect to your HP iPAQ, try the following options.
  • Make sure Bluetooth is turned on.
  • Make sure you have not restricted other devices from finding your HP iPAQ.
  • Check your Bluetooth settings to make sure you have allowed your device to be discovered by others to connect.
Unpairing Bluetooth devices
Follow these steps to remove a paired relationship between devices.
  • Tap the (iPAQ Wireless) icon.
  • Make sure that Bluetooth is already on. If not, turn on Bluetooth.
  • Tap Bluetooth > Bluetooth Connections > Menu > Paired devices .
  • Tap a device name.
  • Tap Remove .
  • Tap Yes to remove the pairing.

Ipaq 214 Hard reset-HP website
Here is the real Hard Reset for the Ipaq 200 series:
This is out of HP website:
HP iPAQ 200 Series Enterprise Handheld - Performing a Factory Reset
Introduction
A factory reset clears all user-installed settings, programs, and data, and restores your HP iPAQ 200 Series Enterprise Handheld to factory settings.
Save all the important programs and files in the iPAQ File Store folder before you factory reset the device. Before saving files to the iPAQ File Store folder, it is a good idea to determine how much memory is available in the folder.
Step one: Checking memory availability in iPAQ File Store folder
Follow these steps to view the memory available in iPAQ File Store folder.
1. Tap Start on your device.
2. Then tap Settings > System > Memory > Storage Card .
3. Select iPAQ File Store from the list.
Step two: Saving files and programs in iPAQ File Store folder
Follow these steps to save files to iPAQ File Store folder:
1. Copy all the files to be saved to the iPAQ File Store folder.
2. Tap Start > Programs > File Explorer > My HP iPAQ > iPAQ File Store .
3. Tap Edit > Paste .
CAUTION: iPAQ File Store might contain a special folder called hp to store system files. Do not save new files or modify existing files in this hp folder.
Step three: Performing factory reset
Follow these steps to perform a factory reset of the device.
1. Press and hold the Record , Windows , OK , and Reset buttons at the same time.
Figure 1: Buttons used to perform factory reset
1 - Record
2 - Windows
3 - OK

The Hard Way
HP iPAQ 200 Series Enterprise Handheld - Performing a Factory Reset
Introduction
A factory reset clears all user-installed settings, programs, and data, and restores your HP iPAQ 200 Series Enterprise Handheld to factory settings.
Save all the important programs and files in the iPAQ File Store folder before you factory reset the device. Before saving files to the iPAQ File Store folder, it is a good idea to determine how much memory is available in the folder.
Step one: Checking memory availability in iPAQ File Store folder
Follow these steps to view the memory available in iPAQ File Store folder.
Tap Start on your device.
Then tap Settings > System > Memory > Storage Card .
Select iPAQ File Store from the list.
Step two: Saving files and programs in iPAQ File Store folder
Follow these steps to save files to iPAQ File Store folder:
Copy all the files to be saved to the iPAQ File Store folder.
Tap Start > Programs > File Explorer > My HP iPAQ > iPAQ File Store .
Tap Edit > Paste .
CAUTION: iPAQ File Store might contain a special folder called hp to store system files. Do not save new files or modify existing files in this hp folder.
Step three: Performing factory reset
Follow these steps to perform a factory reset of the device.
Press and hold the Record , Windows , OK , and Reset buttons at the same time.
Figure 1: Buttons used to perform factory reset
1 - Record
2 - Windows
3 - OK
4 - Reset
Hold all the buttons for 2 seconds.
Release the Reset button while continuing to hold the Record , Windows , and OK buttons.
A Clean Boot message is displayed, indicating successful restoration of factory settings on your device.
The Easier Way
Install HP iPAQ Setup Assistant on your desktop,
A factory reset is one of the options. One click does it!

hard reset ipaq rw 6815
rw 68xx
Per eseguire un Hard(clean) reset e ripristinare le impostazioni originali dell'HP iPAQ:
1. Premere insieme i tasti Answer/Send, Power, e End Call.
2. Mentre li mantenete premuti, usate lo stilo per premere leggermente il tasto Reset
alla base dell' HP iPAQ finchè il dispositivo riparte.
3. Quando l' iPAQ riparte, rilasciate tutti i tasti, poi rimovete lo stilo dal tasto di Reset.